Reverse Line Feed; Paper-Out Override; Clear Buffer; Print Head Direction - Oki ML4410 User Manual

Note:
Normally, the IBM PC adds a line feed command to
each CR command. In IBM SET1, a CHR$(141)
Carriage Return command can be sent causing a
return without an automatic LF. If the printer prints
several lines without advancing the paper, the
printer's menu option AUTO LF should be set to
YES.
Carriage Return & Line Feed Decimal Hex. ASCII Comp.
Carriage return
Insert line feed

Reverse Line Feed

Reverse Line Feed Decimal
Reverse line feed
This executes an immediate reverse line feed, which is acted on only once
upon receipt. Therefore, if a reverse of several lines is required, the
command must be sent once for each reverse line feed required. It is not
possible to reverse over the Top of Form.

Paper-out Override

To disable the paper-out switch to keep the printer printing to the very
bottom of the page, enter:
Paper-out Override
Paper-out override
Reactivate paper-out sensor 27 57

Clear Buffer

This code eliminates a line of data if it has not yet been printed.

Print Head Direction

When printing reports with columns requiring precise alignment,
unidirectional printing improves graphics print quality with more accurate
column alignment. After specifying this feature, the printer prints only in
one direction, left to right
44
27 93
Decimal Hex. ASCII Comp.
27 56
Clear Buffer Decimal Hex. ASCII Comp.
Clear buffer 24
13 0D CR
10 0A LF
Hex. ASCII Comp.
1B 5D ESC ] P
1B 38 ESC 8 P F
1B 39 ESC 9 P F
18 CAN P F
P F
P F
User's Guide