Character Pitch - Oki ML5520 User Manual

Near Letter Quality
Super Speed Draft
ML5590ECO/ML5591ECO
Press PRINT QUALITY (1) to select:
Letter Quality
High Speed Draft
Utility
NOTE
Front panel settings for print quality and character pitch are normally
overridden by software commands.
To select the typeface you want, press PRINT QUALITY (1) until the appropriate front panel
lights are on.
C
HARACTER PITCH
Character pitch determines how many characters will print on each line. You can choose a
specific fixed width (10 to 20) for each character in characters per inch (CPI). The higher
cpi settings are often used for spreadsheets.
Proportional (PROP) sets character widths based on the character itself: e.g., the letter i is
assigned a narrower width than the letter m. This provides a more polished, typeset
appearance.
To select Proportional, press the CHARACTER PITCH key until both the cpi value and PROP
lights are illuminated.
To select non-proportional, press the CHARACTER PITCH key until the light for the cpi value
you wish to use is illuminated.
>
>
>
>
1
>
>
>
>
>
>
1
Using your printer > 39
Highest quality, lowest speed
Courier or Gothic
Lowest quality, highest speed
Gothic typeface only
Highest quality, slowest speed
Choice of 7 typefaces
Lower quality, higher speed
Gothic typeface only
Medium quality, medium speed
Gothic typeface only