Table of Contents
Advertisement
Top of Form
The top of form (TOF) is automatically set when paper is loaded. However
and if required, the TOF can be manually adjusted as follows:
1.
Press the ONLINE button to turn the printer off line.
2.
To move the TOF up, press and hold the SHIFT button, then press
the MICROFEED UP button until the paper is in the required
position.
3.
To move the TOF down, press and hold the SHIFT button, then
press the MICROFEED DOWN button until the paper is in the
required position
4.
Press the ONLINE button.
PRINTER EMULATION
Your printer can use one of three emulations - Epson FX; IBM Proprinter
III; Oki Microline. The default setting for emulation is IBM Proprinter, but
this can be changed as follows:
1.
Press the MENU button on the control panel and the LCD display
changes to MENU GROUP Printer Control.
Note:
For further explanation of the menu system on this
printer, refer to Menu Mode in Operation.
2.
Press the ITEM button, then press the OPTION button until the
required printer emulation is displayed.
3.
Press the STORE button to select the printer emulation.
Note:
When printing through Windows, the printer
emulation automatically changes to Epson FX. After
the printing is completed, printer emulation remains
set to Epson FX.
SELF TESTS
To check if your printer is working correctly, the following self tests can
be run:
1.
Make sure there is paper loaded into the printer.
Set Up
9
Advertisement
Table of Contents
