Setting The Top Of Form (Tof); Temporarily Changing The Top Of Form Setting - Oki ML3320 User Manual

S
ETTING THE TOP OF FORM
When setting the Top of Form, use the red line (1) on the paper shield as a reference:
1. Make sure the printer is deselected (SEL light off).
2. Press and hold SHIFT (1), then:
(a) Press LF (2) to move Top of Form higher on page
(b) Press FF/LOAD (3) to move Top of Form lower on page
3. Press SEL to re-select the printer.
T
EMPORARILY CHANGING THE TOP OF FORM SETTING
To set the Top of Form position lower for one page only:
1. Press SEL to deselect the printer.
2. Press LF to change the position of the Top of Form.
NOTE
This setting will not apply to any following pages.
(TOF)
3
1 2
Loading paper > 19
1