Delete Command (Epson); Half-Speed Printing Commands (E/Ml); Initialize Printer Commands (E/Ml) - Oki MICROLINE ML521 Reference Manual

Delete Command (Epson)

ML320 E/I, ML321 E/I
Function
Delete One Character Command
This command deletes the last character sent to the printer. It will not delete graphics data.

Half-Speed Printing Commands (E/ML)

ML320 E/I, ML321 E/I
ML320 Std., ML321 Std.
Function
Half-Speed Printing On
Half-Speed Printing Off
This command controls the speed of printing. Half-speed printing is quieter than full speed.

Initialize Printer Commands (E/ML)

ML320 E/I, ML321 E/I
ML320 Std., ML321 Std.
Function
Initialize Printer
These commands remove any data in the printer's buffer and return the printer to the current
menu settings. They will override any features set on the printer's front panel or through
previous commands. Also known as the initialize printer or reset commands.
Note: In order for this command to be effective, the Reset Inhibit item in the printer Menu
must be set to NO (the factory default). If the setting has been changed to YES, this
command will be ignored.
ML320 Turbo, ML321Turbo
ML390 Turbo, ML391 Turbo
ASCII
DEL
ML320 Turbo, ML321Turbo
ML390 Turbo, ML391 Turbo
IBM
Not applicable
Not applicable
ML320 Turbo, ML321Turbo
ML390 Turbo, ML391 Turbo
IBM Epson
Not applicable ASCII: ESC @
Dec: 27 64
Hex: 1B 40
Chapter 12: Miscellaneous Commands
Dec Hex
127 7F
Epson ML
ASCII: ESC s 1 ASCII: ESC <
Dec: 27 115 49 Dec: 27 60
Hex: 1B 73 31 Hex: 1B 3C
ASCII: ESC s 0 ASCII: ESC >
Dec: 27 115 48 Dec: 27 62
Hex: 1B 73 30 Hex: 1B 3E
ML
ASCII: ESC CAN
Dec: 27 24
Hex: 1B 18
ML520, ML521
ML590, ML591
ML520, ML521
ML590, ML591
ML520, ML521
ML590, ML591
127