Superscript/Subscript Commands (Ibm/E/Ml) - Oki MICROLINE ML521 Reference Manual

Parameters L and H
p p
Parameters L and H are used to set the point size according to the following equation:
p p
L and H can have any value from 0 to 255 decimal.
p p
See "Table 17: Epson ESC X Command — Point Sizes for N

Superscript/Subscript Commands (IBM/E/ML)

ML320 E/I, ML321 E/I
ML320 Std., ML321 Std.
Function
Start Superscript Printing
Stop Superscript Printing
Start Subscript Printing
Stop Subscript Printing
Superscript characters are printed above the normal print line, and are used for exponents and
special typographic effects (x
Superscripts and subscripts will print as full-width characters. They cannot be used with
double-height printing.
20
N = [L + (H
p p
ML320 Turbo, ML321 Turbo
ML390 Turbo, ML391 Turbo
IBM
ASCII: ESC S 0
Dec: 27 83 0
Hex: 1B 53 00
ASCII: ESC T
Dec: 27 84
Hex: 1B 54
ASCII: ESC S 1
Dec: 27 83 1
Hex: 1B 53 01
ASCII: ESC T
Dec: 27 84
Hex: 1B 54
2
). Subscripts are handy for chemical formulas (H
Chapter 3: Character Size & Spacing Commands
x 255] x 0.5
p
Values," above.
p
Epson ML
ASCII: ESC S 0 ASCII: ESC J
Dec: 27 83 0 Dec: 27 74
Hex: 1B 53 00 Hex: 1B 4A
ASCII: ESC T ASCII: ESC K
Dec: 27 84 Dec: 27 75
Hex: 1B 54 Hex: 1B 4B
ASCII: ESC S 1 ASCII: ESC L
Dec: 27 83 1 Dec: 27 76
Hex: 1B 53 01 Hex: 1B 4C
ASCII: ESC T ASCII: ESC M
Dec: 27 84 Dec: 27 77
Hex: 1B 54 Hex: 1B 4D
ML520, ML521
ML590, ML591
O).
2