Case IH Steiger 370 CVT Service Manual page 658

For the 2032 mm (80 in) spacing
9. Remove two top inner mounting bolts securing the
upbox assembly to the center section extension as
shown.
10. Loosen and remove the two outer upper mounting
bolts.
11. Separate the upbox/yoke assembly (1) approximately
38 mm (1.5 in) from the center section extension (2).
Use a pry bar (3) to keep the shaft in position in the
differential.
Front axle system - Front axle track yoke assembly
48193194 12/10/2017
25.4 [25.500] / 10
9
RAIL12TR02710AA
10
RAIL12TR01597AA