Case IH Steiger 370 CVT Service Manual page 570

7. Use the 380002570 spanner wrench to loosen the lock
nut two complete turns.
NOTE: The number of complete turns required to remove
the nut must be counted and recorded for proper installa-
tion.
8. Lift the final drive assembly to an upward position to
rest on planking as shown.
9. Remove the lock nut (1) and the inner bearing cone (2)
from the axle.
10. Use a hoist to lift the axle shaft from the housing.
Front axle system - Final drives
48193194 12/10/2017
25.3 [25.310] / 58
7
RCPH10FWD146ABJ
8
RCPH10FWD147ABJ
9
RCPH10FWD148ABJ
10
RCPH10FWD149ABJ