Case IH Steiger 370 CVT Service Manual page 478

35. Lubricate the seals of a new piston with clean assem-
bly grease.
36. Hand seat the differential lock piston into the bore of
the case.
37. Install the splined side gear on top of the pinion gears
so that all gears are in mesh.
38. Install the six anti-rotation dowel pins into the holes in
the case.
Front axle system - Front bevel gear set and differential
48193194 12/10/2017
25.2 [25.102] / 364
36
RCPH10FWD045ABJ
37
RCPH10FWD046ABJ
38
RCPH10FWD047ABJ
39
RCPH10FWD048ABJ