Commissioning Operation; Logging Into Commissioning Mode - andrews MAXXflo EVO CWH 30/201 Operating Instructions Manual

3.0 COMMISSIONINg OPERATION

The features available at "Expert" level are intended for use by a competent commissioning engineer. The
following section details options/screens that are available to the commissioning engineer in additions to
the options/screens available at end user level.
3.1 LOggINg ONTO COMMISSIONINg MOdE
Using the Graphical User Interface (GUI), screen, move the control knob to select "Setup" page on the navigation bar
and press the control knob.
In the work area , use the control knob to select "Expert" fi eld and press the control knob to select
Select "Commissioning" using the control knob and press the control knob to select it. Press control knob to continue
into commissioning mode.
Commissioning
Regional settings
Special operations
Settings
Expert
Expert
Select user level
Enter password
Expert
Login successful
Accessible for commissioning
25
Back
Commissioning
_ _ _ _ _
Back
Continue
MAXXfl o EVO