Table of Contents
Advertisement
⚫ Do not try to stop the cutting device (nylon wire) with your hands.
Always let it come to a stop by itself.
CAUTION! After stitching off, the nylon wire will continue to rotate
for a few more seconds.
⚫ Only use the original type of nylon wire. Under no circumstances use
metal wire instead of nylon.
⚫ Do not use the trimmer to cut grass which is not in contact with the
ground; for example do not cut grass which is not walls or rocks etc.
⚫ Do not stitch the grass trimmer on in enclosed or poorly ventilated
spaces or in the presence of inflammable and/or explosive
substances such an liquids,gas and powders.
⚫ The user of the grass trimmer is responsible for any damage
sustained by third parties which has been caused by the grass
trimmer within the working area.
⚫ Only cut during broad daylight or with corresponding artificial light.
⚫ Do not cross roads or gravel paths with the trimmer still running .
⚫ When the trimmer is not in use, store it in a dry place and out of the
reach of children.
⚫ The trimmer should be used in compliance with these instructions
and only in a position which is vertical in relation to the ground . Any
other position is dangerous.
⚫ Check regularly that the screws are properly secured.
⚫ Before using the machine and after any impart, shark for signs of
wear or damage and repair as necessary.
⚫ Take care against injury form any device fitted for trimming the
filament line length.After extending new cutter line always return the
machine to its normal operating position before switching on.
⚫ never use replacement parts or accessories not provided or
recommended by the manufacturer.
⚫ always ensure that ventilation openings are kept clear of debris.
⚫ Never to replace the non-metallic cutting means with metallic cutting
means
Advertisement
Table of Contents
