Table of Contents
Advertisement
2. Fold the protective plate(B)and tighten the screw cap to the right direction
3. Before each starting of the machine check, if the Lower tubular shaft firmly and
securely seated.
Before starting machine make sure that the Iower tube spindle firmly and securely
fits and that
it is in the correct position．
Disassemble
For removal the screw cap on the left side
Lift the protective plate， pressing unlock the locking latch and slide the lower tubular
shaft.
ASSEMBLY 0F HANDLE(PIC．3)
1. Loose the Allen screws on the handle．
2. Into of handle grip on the upper tube insert the multifunctional handle and
fasten-it with a bracket and 4 Allen screws(as shown)．
3. Screw to tight．
ASSEMBLY OF PROTECTIVE COVER(PIC.4)
Remove the Allen screws from the protective cover．Replace the protective cover on
shaft ． Screw
the
pipe
Instructions for Use
the
socket
head
screws
(A)
as
shown.
Advertisement
Table of Contents
