Camera Configuration Menu (Control Options) - Settings Of Speed Dome Image And Movement.32 - urmet domus 1093 Installation And Instruction Manual

Option
CAMERA NAME SETUP
COORDINATES
START-UP MSG
DOME INFORMATION
RETURN
12.1.3 Camera configuration menu (CONTROL OPTIONS) – Settings of speed dome image and movement.
From the first level menu, choice <CONTROL OPTIONS> to select the options concerning the speed dome displaying
modes and motions.
Important note
If a menu is accessed (ex: Control Options) and the last line of the "RETURN" command cannot be read, it means there
is a second screen containing commands/options. To access it, use the mouse to click on the arrow pointing downward
on the video selector.
DS1093-530
Value
ON/OFF
ON/OFF
2 Auto Flip
3 Proportional Spd
4 Pan Reverse
5 Tilt Reverse
7 Auto Focus
..................
8 Auto AE
9 VectorScan AF
10 -5 Tilt Limit
11 Speed Limit
12 Return
Explanation
This operation makes it possible to assign a name to the speed
dome. Pressing OPEN or IRIS+ twice accesses the screen page
for naming of the device.
Enabling/disabling of displaying of Pan/Tilt coordinates and zoom
percentage.
Enabling/disabling of the start-up message
Product information menu (see below)
Closes OSD menu
CONTROL OPTIONS
ON
ON
ON
ON
PTZ