General Information; Product Description; General Features - urmet domus 1093 Installation And Instruction Manual

1

GENERAL INFORMATION

Dear Customer,
Thank you for purchasing this product.
This document shows how to install and use the IP 1080P URMET Ref.1093/655M2 speed dome.
Read this manual which contains information for correct, safe use carefully.
Keep this manual at hand so that you can refer to it when needed.
2

PRODUCT DESCRIPTION

The Ref.1093/655M2 speed dome ensures high performance in terms of video quality and manoeuvrability, with the
possibility of taking high-quality colour images during the day and black&white images at night.
The speed dome can work in remote mode via TCP/IP network and locally can be combined with the control Ref.
1092/621 or Ref.1092/693 that make it possible to control the variable speed horizontal and vertical panning, tilting and
zooming in professional remote area surveillance CCTV systems.
2.1.1

GENERAL FEATURES

The main technical features are listed below.
 Quick installation design to cut installation time requirements in half
 Sensor 1/2.7"CMOS, 2.0 Mega Pixel
 Resolution 1080P at 25 frames
 Video compression H.264
 Main Stream resolution: 1920×1080, 1280×960, 1280×720, 720×576, 720×480, 640×480
Sub Stream resolution:640×360,480×270,352×288,320×240,352×192,320×192,288×192,256×192
 Supports protocols TCP，IP，RTSP，FTP，PPPOE，DHCP，DDNS，NTP，UPnP
Ethernet interface 10/100Base

 360-degree horizontal rotation (PAN) with maximum speed of 180 degrees/s
 90-degree vertical rotation (TILT) with maximum speed 100 degrees/s
 Zoom function 20X, f=4.7mm – 84.6mm (F1.2)
 Minimum luminosity: Colour 0.2Lux / B&W 0.02Lux
 IR light: LED Array
 Maximum IR coverage: 100m.
 Preset points programming function: 128 (precision ± 0.15°)
 Preset rotation speed: 200 degrees/s
 Vector Scan Function– functions / preset sequence: 7
 Function Pattern - stored paths: 6
 Alarms managed by menu: 8
 On Screen Display (OSD) for easy speed dome parameter programming
 RS485 connection for speed dome control in PELCO – D mode
 Baud rate 9600bps
 Default IP address of the camera IP: 192.168.1.18.
 Default username of the camera IP: admin (lower case); Password: admin (lower case).
 Default web port: 80. ONVIF port: 8999.
 In order to prevent potential IP address conflicts, it is recommended that on IP camera be connected and
configured in the network at a time.
 Power supply: 24 V AC – 3A
 Consumption <10W
Working temperature (with heating and internal fan): -30  55 °C

Humidity without condensation 0%  90%

 Waterproof IP66 level
DS1093-530