Manufacturer's Checklist - lancer S8H Installation, Operation & Service Manual

S8H Hi-Carb Superchiller 230V / 50Hz

11 Manufacturer's Checklist

Checked by ......................................................................
Postmix Tested by ..........................................................................................................................................
Gas Charge ................................................
Electrically tested by (P/MIX)
TAG No. (P/MIX) ............................................................
High temperature probes located on dryers are secure and not loose.
Refrigeration system final check. Ensure evaporator fully frosts.
Check all tube work for rubbing e.g. discharge line, liquid line, capillary tube.
Condenser not touching divider panel or grille.
Condenser fans operating and not contacting shroud.
Agitator blades tight and not touching coils cradle.
Overflow pipe correct height and positioned straight.
All motors and pumps secured and mounted correctly in correct locations.
All pumps run quietly and carbonator pump switched ON/OFF.
Check icebank probe position and tightness and correct wiring of harness.
Carbonator and plumbing pressure tested. Check for leaks on pumps, clamps, welds, strainers, carbonator fittings and all joints.
Check check-valve and strainer indicator correct flow direction
Check correct flow direction
Coils in cradle correctly and spaced.
Postmix tubes not rubbing.
Plumbing strapped correctly and not touching the agitator.
Tube labels on correct tube.
Electrical box labels correctly positioned and Superchiller sticker correctly positioned and straight.
Attention sticker fitted and correctly positioned.
Clean exterior of unit including power cords.
Condenser filter fitted.
Warning sticker applied
Verify pressure switches working correctly.
Spreader pin pointing towards tank.
Check body for sharp edges.
Check lid for cleanliness and rough edges. Fit and secure.
Carbonator relief valve fitted and correct.
Copy checklist & file, put manual/checklist and pump insulator kit in plastic bag & place in the tank area.
Customer asset No.
W/O ...................................................................
www.lancerbeverage.com
Hoshizaki Lancer reserve the right to change specifications without notice.
Images are for illustration purposes only as product may vary.
Date .............................................................
Icebank Probe fitted ........................................................
(REF) Refrigeration tested by ...............................................
(REF) .............................................................
Affix label here
Page 28 of 28
Part No: 68000036
No. 111 – 4 Apr 22