Overview - Espressif Systems ESP32-C6 Series Hardware Design Manuallines

1 Overview

1 Overview
Note:
Check the link or the QR code to make sure that you use the latest version of this document:
https://espressif.com/sites/default/files/documentation/esp32-c6_hardware_design_guidelines_en.
pdf
ESP32-C6 series is a low-power MCU-based SoC solution that supports 2.4 GHz Wi-Fi 6 (802.11 ax),
®
Bluetooth 5 (LE), Zigbee 3.0 and Thread 1.3 (802.15.4). With its state-of-the-art power and RF performance,
this SoC is an ideal choice for a wide variety of application scenarios relating to Internet of Things (IoT), smart
home, industrial automation, health care, and consumer electronics.
ESP32-C6 has a high-performance (HP) 32-bit RISC-V processor and an low-power (LP) 32-bit RISC-V
processor, operating at up to 160 MHz and 20 MHz respectively. The chip supports application development to
operate without the need for a host MCU.
ESP32-C6 series provides a highly-integrated way to implement wireless communication technologies using a
complete RF subsystem, including a antenna switch, RF balun, power amplifier, low noise amplifier (LNA), filter,
power management unit, calibration circuits, etc. As a result, PCB size has been greatly reduced.
With its advanced calibration circuitry, ESP32-C6 series can dynamically adjust itself to remove external circuit
imperfections or adapt to changes in external conditions. As such, the mass production of ESP32-C6 series
does not require expensive and specialized Wi-Fi test equipment.
For more information about ESP32-C6 series, please refer to
Espressif Systems
ESP32-C6 Series
5
Submit Documentation Feedback
Datasheet.
ESP32-C6 Series Hardware Design Guidelines v1.0