Data Type E_Cx81X0_Led - Beckhoff CX8180 Manual

Requirements
Development environ-
ment
TwinCAT v3.1 Build
4022.30
7.2.2 Function F_CX81x0_LED_ERR
Since the CX8180 supports different protocols, the two LEDs WD and ERR on the CX8180 are not used by
the firmware. This allows the user to create his own diagnosis messages. The LEDs can be used to indicate,
for example, whether the CX8180 has received an IP address from the DHCP server or whether devices are
exchanging data.
The function F_CX8180 CX8180 _LED_ERR controls the ERR LED on the CX8180. Various color and
flashing modes can be used here. The possible LED colors are red and green.
VAR_INPUT
VAR_INPUT
eMode : E_CX81x0_LED;
END_VAR
eMode [} 49]: way in which the LED lights up.
VAR_OUTPUT
F_CX8180_LED_ERR : INT;
F_CX8180_LED_ERR: -1, non-implemented flash code, 0 OK
Requirements
Development environ-
ment
TwinCAT v3.1 Build
4022.30
7.2.3

Data type E_CX81x0_LED

TYPE E_CX81x0_LED : (
eCX81x0_LED_GREEN_OFF,
eCX81x0_LED_GREEN_ON,
eCX81x0_LED_GREEN_FLASHING_Quick,
eCX81x0_LED_GREEN_FLASHING_200ms,
eCX81x0_LED_GREEN_FLASHING_500ms,
eCX81x0_LED_GREEN_FLASHING_Pulse,
eCX81x0_LED_RED_OFF:=20,
eCX81x0_LED_RED_ON,
eCX81x0_LED_RED_FLASHING_Quick,
eCX81x0_LED_RED_FLASHING_200ms,
eCX81x0_LED_RED_FLASHING_500ms,
eCX81x0_LED_RED_FLASHING_Pulse,
eCX81x0_LED_GREEN_RED_OFF:=100,
eCX81x0_LED_GREEN_RED_FLASHING_200ms,
eCX81x0_LED_GREEN_RED_FLASHING_500ms
);
END_TYPE
CX8180
Target platform
ARM
Target platform
ARM
Version: 1.5
Hardware
CX8180
Hardware
CX8180
Programming
PLC libraries to include
Tc2_SystemCX
PLC libraries to include
Tc2_SystemCX
49