Product overview
4.5
MicroSD card
The basic equipment of the CX8180 includes a 512 MB MicroSD card. You can optionally order the
Embedded PC with a larger MicroSD card (1 GB, 2 GB, 4 GB or 8 GB).
The cards employed are SLC memory with extended temperature range for industrial applications. Use
exclusively MicroSD cards approved by Beckhoff.
Order designation
CX1900-0123
CX1900-0125
CX1900-0127
CX1900-0129
Order designation
CX1900-0122
CX1900-0124
CX1900-0126
CX1900-0128
CX1900-0130
4.6
Reset button
Use the Reset button to activate Config mode. You can use this function if the PLC program unexpectedly
causes an error. To do this, keep the Reset button pressed during the restart for an extended period.
Activate Config mode as follows:
1. Open the front flap.
2. Switch off the Embedded PC.
3. Start the Embedded PC and keep the Reset button pressed until the ERR LED turns red and then
yellow.
ð The CX81xx Embedded PC is put into Config mode.
18
Capacity
1 GB
2 GB
4 GB
8 GB
Capacity
512 MB
1 GB
2 GB
4 GB
8 GB
Version: 1.5
Description
MicroSD card (SLC memory) with
extended temperature range for
industrial applications instead of
the 512 MB card (ordering option)
Description
MicroSD card (SLC memory) with
extended temperature range for
industrial applications as spare
part.
CX8180