Creating A Plc Project - Beckhoff CX8180 Manual

6.4.3

Creating a PLC project

The next steps describe how to create a PLC project in TwinCAT and add it in the tree view.
Requirements for this step:
• A newly created TwinCAT XAE project.
Create a PLC project as follows:
1. Right-click on PLC in the tree view.
2. In the context menu click on Add New Item and select the Standard PLC Project.
3. In the tree view click on the newly created PLC project, then double-click on MAIN (PRG) under POUs.
4. Write a small program, as shown in the diagram below.
CX8180 Version: 1.5
Configuration
37