Introducing The E3800 Switches - HP E3800-24G-2SFP+ Installation And Getting Started Manual

Introducing the E3800 Switches

The HP E3800 switches are multiport switches that can be used to build high-
performance switched networks. These switches are store-and-forward
devices offering low latency for high-speed networking. The E3800 switches
also support a field-replaceable Redundant Power Supply and fan tray, Power
over Ethernet (PoE/PoE+) technologies, and full network management
capabilities.
In addition, the E3800 switches support the HP FlexChassis Mesh feature
for stacking the switches. When E3800 Stacking Modules (J9577A) are
installed in the switches, any combination of up to ten E3800 switches can be
stacked together via high-speed backplane cables to form a single extended
virtual switch. See "Stacking Information and Topologies" on page
the E3800 Advanced Traffic Management Guide for more stacking
information.
These switches are described in this manual:
Non-PoE Switches
HP E3800-24G-2SFP+ Switch (J9575A)
HP E3800-48G-4SFP+ Switch (J9576A)
HP E3800-24SFP-2SFP+ Switch (J9584A)
HP E3800-24G-2XG Switch (J9585A)
HP E3800-48G-4XG Switch (J9586A)
This chapter describes these switches with the following information:
■ Fronts of the switches:
• Network Ports
• Management Ports
• LEDs
• Buttons
Backs of the switches:
■
• Power Supplies and Power Connectors
• Fan Tray
■ HP E3800 Stacking Module
Switch Features
■
PoE+ Switches
HP E3800-24G-PoE+-2SFP+ Switch (J9573A)
HP E3800-48G-PoE+-4SFP+ Switch (J9574A)
HP E3800-24G-PoE+-2XG Switch (J9587A)
HP E3800-48G-PoE+-4XG Switch (J9588A)
1
2-23, and
1-1