Table of Contents
Advertisement
1
z z z z Installing from CD-ROM Menu (Windows XP/Server 2003)
• If some other printer driver is already installed on your computer for the parallel port (ex. LPT1:), before installing Canon
iR1510-1670 be sure to uninstall that driver or set it for file output (FILE:).
• For installation instructions using Plug and Play or Add Printer Wizard for Parallel Port, → Printer Guide.
1
Make sure the computer is turned off.
2
Make sure the power cord of the machine is plugged into the power outlet and the machine is connected to your
computer using parallel cable (→ pp. 7, 8).
3
Turn on the computer. Start up Windows XP/Server 2003.
Plug and Play is being carried out and the Found New Hardware Wizard dialog box appears. Click Cancel. For installation
instructions, using Plug and Play function of your computer, → Printer Guide.
• If any Windows application (including virus checkers) starts up automatically, exit it before installation.
4
Set the attached CD-ROM into the CD-ROM drive of your computer.
CD-ROM Menu will appear automatically. If the CD-ROM was already set in at the start up, first eject the CD-ROM, then
insert it again.
• If the CD-ROM Menu does not appear automatically, choose Run At from the Start Menu → type D:\AUTORUN.EXE (if your
CD-ROM drive is drive D:) in the command line → click OK.
5
Click Canon iR1510-1670 Install button.
Add Printer Wizard dialog box appears. Click Next >.
Select Local printer attached to this computer →
6
click Next >.
The printer port selection dialog box appears.
• To check on Automatically detect and install my Plug
and Play printer is not recommended.
7
Click Use the following port:. Select the printer
port, the machine is connected to (usually LPT1:
(Recommended printer port)) → click Next >.
Add Printer Wizard dialog box (Manufacturers/
Printers selection) appears.
• If you select a port, other than the port Canon iR1510-
1670 is connected to, COM: or FILE: port, the
machine will not print.
23
Advertisement
Table of Contents
