Table of Contents
Advertisement
12
When the installation is complete, the following
dialog box appears. To close the dialog box, click
OK.
z z z z Installing from CD-ROM Menu (Windows NT 4.0)
• If some other printer driver is already installed on your computer for the parallel port (ex. LPT1:), before installing Canon
iR1510-1670, be sure to uninstall that driver or set it for file output (FILE:).
• For installation instructions using Add Printer Wizard for Parallel Port → Printer Guide.
1
Make sure the computer is turned off.
2
Make sure the power cord of the machine is plugged into the power outlet and the machine is connected to your
computer using parallel cable (→ pp. 7, 8).
3
Turn on the computer. Start up Windows NT 4.0.
4
Set the attached CD-ROM into the CD-ROM drive of your computer.
CD-ROM Menu will appear automatically. If the CD-ROM was already set in at the start up, first eject the CD-ROM, then
insert it again.
• If the CD-ROM Menu does not appear automatically, choose Run At from the Start Menu → type D:\AUTORUN.EXE (if your
CD-ROM drive is drive D:) in the command line → click OK.
5
Click Canon iR1510-1670 Install button.
Add Printer Wizard dialog box appears.
Select My Computer → click Next >.
6
The printer port selection dialog box appears.
18
7
Select the check box next to the printer port, the
machine is connected to (usually LPT1:) → click
Next >.
Add Printer Wizard dialog box (Manufacturers/
Printers selection) appears.
• If you select a port, other than the port Canon
iR1510-1670 is connected to, COM: or FILE: port, the
machine will not print.
Advertisement
Table of Contents
