Connecting The Telephone Line And An External Device (Only For The Ir1570F Model) - Canon iR1510 Quick Start Manual

1
Energy Saver Mode
This machine provides an energy saver function. When no operations are performed for about 5 minutes, the machine
automatically enters the energy saver mode. For details, → Reference Guide.
n n n n Setting the Energy Saver Mode Manually
Press Energy Saver.
• The LCD is turned off and the Energy Saver key lights up.
n n n n Restoring from the Energy Saver Mode
Press Energy Saver.
• The Energy Saver key goes off and the machine enters standby mode.
• The machine can be restored from the energy saver mode immediately.
n n n n Connecting the Telephone Line and an External Device (Only for the
iR1570F model)
The machine has two jacks on the left side for connection of the following:
: Telephone line
: External device, such as telephone or answering machine
1
Connect the supplied
1
Connect the supplied
telephone line to the
telephone line to the
then connect the other end
then connect the other end of
of the line to the telephone
the line to the telephone jack
jack on your wall.
on your wall.
Users in the UK Only
If the connector of the external device cannot be connected to the jack on the machine,
you will need to purchase a B.T. adaptor to connect it as follows:
jack,
jack,
Connect the external device line to the B.T.
adaptor, then connect the B.T. adaptor to
the jack.
2
When you require to send and
2
When you require to send and
receive both faxes and voice
receive both faxes and voice
calls, connect the line from the
calls, connect the line from the
telephone or answering
telephone or answering
machine to the jack.
machine to the jack.
B.T. ADAPTOR
B.T. ADAPTOR
9