Chapter 3 AMI BIOS Setup
3-1 BIOS SETUP --- CMOS Setup Utility
This mainboard comes with the AMI BIOS from American Megatrends
Inc. Enter the CMOS Setup Utility Main Menu by:
1. Turn on or reboot your system. After a series of diagnostic checks,
the following message will appear:
2. Press the <Del> key and the main program screen will appear as
follows:
AMIBIOS NEW SETUP UTILITY - VERSION 3.31a
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Power Management Features
PNP/PCI Configurations
Integrated Peripherals
Hardware Monitor Status
Frequency/Voltage Control
F1: Help
: Select Item
Esc: Exit
<- ->: Select Menu
Set Time, Date, Hard Disk Type...
3. Use the arrow keys on your keyboard to select an option, and press
<Enter>. Modify the system parameters to reflect the options installed
in your system.
4. You may return to the Main Menu anytime by pressing <ESC>.
5. In the Main Menu, "Save & Exit Setup" saves your changes and
reboots the system, and "Exit Without Saving" ignores your changes
and exits the program.
PRESS <Del> TO RUN SETUP
+/- : Change Values
Enter: Select
13
Chapter 4 BIOS Setup
Set Supervisor Password
Load Optimal Defaults
Save & Exit Setup
Exit Without Saving
F9: Setup Defaults
Sub-Menu
F10: Save & Exit
Need help?
Do you have a question about the 85LIR-C and is the answer not in the manual?