Noise / Vibration; Caractéristiques Techniques - Skil GS1 0582 Series Original Instructions Manual

Machine does not operate

- empty battery -> charge battery
- hot battery -> let battery cool down
- internal fault -> contact dealer/service station
 Machine operates intermittently
- internal wiring defective -> contact dealer/service
station
- on/off switch defective -> contact dealer/service station
 Dry chain
- no oil in oil tank-> refill oil
- vent in oil tank cap clogged -> clean cap
- oil passage clogged -> clean oil passage outlet
Chain/chain bar overheats

- no oil in oil tank -> refill oil
- vent in oil tank cap clogged -> clean cap
- oil passage clogged -> clean oil passage outlet
- chain is overtensioned -> adjust chain tension
- dull chain -> sharpen chain or replace
 Machine vibrates abnormally
- chain tension too loose -> adjust chain tension
- dull chain -> sharpen chain or replace
- chain worn out -> replace chain
- chain teeth are facing in the wrong direction ->
reassemble with chain in correct direction
ENVIRONMENT
Only for EU countries
• Do not dispose of electric machines, accessories
and packaging together with household waste
material
- in observance of European Directive 2012/19/EC
on waste of electric and electronic equipment and
its implementation in accordance with national law,
electric machines that have reached the end of their
life must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 4 will remind you of this when the need for
disposing occurs
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit
Only for UK
• Do not dispose of electric machines, accessories
and packaging together with household waste
material
- in observance of Waste Electric and Electronic
Equipment Regulations 2013 (SI 2013/3113), electric
machines that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol 4 will remind you of this when the need for
disposing occurs
! prior to disposal protect battery terminals with
heavy tape to prevent short-circuit

NOISE / VIBRATION

• Measured in accordance with EN 62841 the sound
pressure level of this machine is 82 dB(A) (uncertainty
K=3 dB) and the sound power level 96 dB(A) (uncertainty
K = 3.3 dB), and the vibration <2.5 /s² (triax vector sum;
uncertainty K = 1.5 m/s²)
• The vibration emission level has been measured in
accordance with a standardised test given in EN 62841;
it may be used to compare one machine with another
and as a preliminary assessment of exposure to vibration
when using the machine for the applications mentioned
- using the machine for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level
- the times when the machine is switched off or when it is
running but not actually doing the job, may significantly
reduce the exposure level
! protect yourself against the effects of vibration
by maintaining the machine and its accessories,
keeping your hands warm, and organizing your
work patterns
b
Élagueuse sur perche sans fil
INTRODUCTION
• Cette machine est prévue pour ébrancher et élaguer des
arbres
• Cette machine n'est pas conçue pour un usage
professionnel
• Vérifiez que toutes les pièces montrées sur le schéma 2
sont contenues dans l'emballage.
• Lorsque des pièces manquent ou sont endommagées,
contactez votre revendeur
• Lire et conserver ce mode d'emploi 3
• Prêtez particulièrement attention aux consignes de
sécurité et aux avertissements ; sinon, vous risquez
de subir des blessures graves
CARACTÉRISTIQUES TECHNIQUES 1
Chaîne de rechange : 90PX040* (l'astérisque * est un
caractère qui indique uniquement la méthode d'emballage,
par ex. carton, blister, sac, etc., non pertinent)
Guide-chaîne de rechange : SKIL 2827742001
ÉLÉMENTS DE LA MACHINE 2
A Tête de l'élagueuse sur perche
B Manche de la tête de l'élagueuse
C Perche télescopique
D Manche de la poignée
Poignée arrière
E
F Guide-chaîne
G Chaîne
H Capot latéral
9. __
J Manchon fileté avant
K Manchon fileté arrière
L Poignée de manœuvre
M Bouton de déverrouillage
N Interrupteur-gâchette
15. Protège-guide __
P
Q Bouton du capot latéral
R Bouton de tensionnage de la chaîne
S Fenêtre d'observation du niveau d'huile
T Bouchon du réservoir d'huile
U Bouton de déverrouillage de la batterie
V Maillon d'entraînement de la chaîne
Rail du guide
W
X Pignon d'entraînement
18
0582