Table of Contents
Advertisement
September 2007
7 Next build out the configuration table by choosing Ai Logix NFAS Trunk
Group and Ai Logix NFAS Trunk Index numbers. Follow the ordering of
the Switch Trunk Group and Switch Trunk Span Index, but start the Ai
Logix NFAS Trunk Group at 0 and do not skip any numbers. Also start
the Ai Logix NFAS Trunk Index at 0 and increment for every span. Do not
restart the Ai Logix NFAS Trunk Index at 0 when you reach the next
Switch Trunk Group.
Installation Guide
Configuring Non-Facility Associated Signaling
91
Advertisement
Table of Contents
