Command Description; Vxworks Shell Debug Utilities; Table 7: Debug Commands - Nortel Express Call Center Troubleshooting Manual

March 2005

VxWorks shell debug utilities

Several debug utilities are available from the VxWorks shell, which can be used
to print the state of certain global variables. The following table provides a list
of available debug commands:
Debug commands
Table 7:
Command
printAllErrors
getAriesState
printAriesState n
printVpGlobs
printVpChannel n
tr "tMaint"
swInfoGet
ifShow
inetstatShow
ping "10.0.0.2",x
Voice Services on Media Card Maintenance and Troubleshooting Guide
Description
Prints logged fatal errors.
Prints current state of all 32 M2616 (Aries)
sets.
Prints globals associated with M2616 (Aries)
set 'x'.
Prints all VP globals.
Prints globals associated with VP channel 'x'.
Resumes suspended task 'tMaint'.
Prints the loadware, DSP, and 8051XA
firmware versions.
Prints the IP and Ethernet addresses.
Prints the status of all network links.
Pings IP address 10.0.0.2 'x' number of times.
Press Ctrl+C to stop to return to VxWorks
shell.
Media Card
25