Huawei SUN2000-4.95KTL-JPL1 User Manual page 66

SUN2000-4.95KTL-JPL1
User Manual
No.
3
4
5
6
7
8
Procedure
Step 1 Route the CT cable terminals into the maintenance compartment through the
cable hole at the bottom of the SUN2000, connect the CT terminals based on the
cable labels.
Step 2 Locate the SUN2000 CT terminal in the fitting bag.
Step 3 Connect the prepared cord end terminals to the corresponding ports of the CT
terminal, and insert the communications terminal into the CT terminal base of the
SUN2000.
Figure 5-29 Connect the CT and CT cables
Issue 05 (2023-02-17)
Label Definition
CT2+ Primary
CT2+
CT2- Primary
CT2–
CT3+ Reserved
CT3-
CT4+
CT4-
Copyright © Huawei Technologies Co., Ltd.
Description
W wire on the power grid side
N/A
5 Electrical Connections
60