Table of Contents
Advertisement
SUN2000-4.95KTL-JPL1
User Manual
● Pay attention not to scratch the core wire when stripping a cable.
● The cavity formed after the conductor crimp strip of the OT or DT terminal is
● Wrap the wire crimping area with a heat shrink tubing or PVC insulation tape.
● When using a heat gun, protect devices from being scorched.
Figure 5-2 Crimping an OT terminal
(A) Core
(D) Hydraulic pliers
Step 2 Connect the PE cable.
Ensure that the PE cable is securely connected.
Issue 05 (2023-02-17)
NO TICE
crimped must wrap the core wires completely. The core wires must contact the
OT or DT terminal closely.
The heat shrink tubing is used as an example.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
(B) Insulation layer
(E) Heat gun
5 Electrical Connections
(C) Heat shrink tubing
43
Advertisement
Table of Contents
