Huawei SUN2000-4.95KTL-JPL1 User Manual page 51

SUN2000-4.95KTL-JPL1
User Manual
Figure 5-4 Removing screws from the maintenance compartment door
Step 2 Prepare cord end terminals for cables, route the cord end terminals into the
SUN2000 maintenance compartment through the cable holes at the bottom of the
SUN2000, and connect the cables.
Figure 5-5 Hole positions
Table 5-4 Hole description
Issue 05 (2023-02-17)
NO TE
Remove the four screws from the cover. Start from the one at the lower-left corner, and the
rest in the counterclockwise sequence.
Hole
1
2
3
4
5
6
Copyright © Huawei Technologies Co., Ltd.
Lead-out Cable Description
Battery input
Communications and CT sampling cable
U1 and W1 terminals of the off-grid output cable
U, O, and W terminals of the grid-tied output power
cable and PE cable
5 Electrical Connections
PV1 input
PV2 input
45