Huawei SUN2000-4.95KTL-JPL1 User Manual page 27

SUN2000-4.95KTL-JPL1
User Manual
Table 2-4 Working mode description
Working
Mode
Standby
Grid-tied
Independent
Shutdown
Issue 05 (2023-02-17)
Description
The SUN2000 enters the standby mode when the external
environment does not meet the requirements for starting the
SUN2000. In the standby mode:
● The SUN2000 continuously checks its status and enters the
operating mode once the operating requirements are met.
● The SUN2000 enters the shutdown mode after detecting a
shutdown command or a fault after startup.
In operating mode:
● The SUN2000 converts DC power from PV strings into AC
power and feeds the power to the power grid.
● The SUN2000 tracks the maximum power point to maximize
the PV string output.
● The SUN2000 enters shutdown mode after detecting a fault
or a shutdown command, and enters standby mode after
detecting that the PV string output power is not suitable for
connecting to the power grid to produce power.
In independent mode, the SUN2000 switches to the off-grid
mode when the power grid fails.
● If the power grid fails, the SUN2000 switches to the
independent mode to supply power to specific loads.
● After the mains recovers, the SUN2000 automatically switches
back to the grid-tied mode.
● In standby or operating mode, the SUN2000 enters shutdown
mode after detecting a fault or shutdown command.
● In shutdown mode, the SUN2000 enters standby mode after
detecting a startup command or detecting that the fault has
been rectified.
Copyright © Huawei Technologies Co., Ltd.
2 Product Overview
21