Huawei SUN2000-4.95KTL-JPL1 User Manual page 53

SUN2000-4.95KTL-JPL1
User Manual
Figure 5-6 Preparing cord end terminals and routing them into the SUN2000
maintenance compartment
(1) Cord end terminal
Ensure that the core of the AC power cable is completely inserted into the wiring
terminal.
Step 2 Insert the crimped cable terminals into the corresponding AC output terminals on
the SUN2000.
Figure 5-7 Installing AC output power cables
Step 3 Connect the AC power cable.
Figure 5-8 Connecting a 101 V AC self-supporting output power cable
Issue 05 (2023-02-17)
(2) Crimping tool
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) Route the cable
terminals into the
cable holes
(4) AC output
terminals
47