Service Board In Slot 3 - Nortel Passport 8250 Command Line Interface Manual

32 Chapter 3 Provisioning ports and connections
See "Portconfig command parameters" (page 32) for the values that the
Passport 8250 supports for line type, line coding, and signal mode.
Table 3
Portconfig command parameters
Connection
unstructured
structured Basic
structured CAS
unstructured
structured Basic
structured CAS SF
structured CAS ESF ESF
241-5101-201 R2.2
Note: Entering the portconfig command without the parameters displays
the existing line type, line coding, and signal mode for all the ports on a
service board.
Note: The values for the portconfig parameters are case sensitive.
Line type
E1
E1-CRC
E1
E1-CRC
E1
E1-CRC
D4
ESF
D4
ESF
D4
Line Coding SignalMode
E1 traffic
HDB3
HDB3
HDB3
DS-1 traffic
B8ZS
AMI
B8ZS
AMI
B8ZS
AMI
B8ZS
AMI
NONE
NONE
BITORIENTED
not applicable
not applicable
not applicable
not applicable