Table of Contents
Advertisement
18 Chapter 1 Introducing the Passport 8250
Provisioning tools
A combination of the following three tools are used to manage the Passport
8250 device and provision connections:
•
•
•
Command line interface
You can perform the following activities in the command line interface (CLI):
•
•
•
•
•
•
•
•
•
•
241-5101-201 R2.2
"Command line interface" (page 18)
"NMS Passport 8250 Tools" (page 19)
"MIB browser" (page 20)
create unstructured and structured connections using default values or
customized values for the following parameters:
— cell delay variation tolerance (CDVT)
— partial cell fill
— maximum buffer size
— CAS
— constant bit rate (CBR) clocking
view connections
delete all connections mapped to a port
use default port configuration settings or customized values for the
following parameters:
— line type
— line coding
— signal mode
configure the redundant ATM uplink port
set the reference clock
view the status of the boards
Modify community strings
check for network connectivity
reboot the Passport 8250
Advertisement
Table of Contents
