Table of Contents
Advertisement
5
Example
The following is an example of loading a different software version. The
LOAD directory changes from C:\LOAD_A to C:\LOAD_B. After changing
the LOAD directory, the Passport 8250 is restarted.
Downloading software
Procedure
1
2
3
4
5
6
Confirm that you want to restart the Passport 8250:
Reboot system from local load? (y/n)
[Edgeplex CLI]: bootpath set
enter the new boot path root directory name [load_a]:
LOAD_B
[Edgeplex CLI]:reboot
Reboot system from local load? (y/n) y
rebooting system . . .
CAUTION
Power during download
Do not interrupt power to the device during the software
download process. If the power is interrupted, the image
can become corrupted.
Start a FTP session.
FTP into the Passport 8250 IP address.
If you have not already done so, log into the FTP session.
See "Logging into the CLI" (page 23) for the username and password.
Move to either the C:\LOAD_A or C:\LOAD_B directory to download
system software.
Download the BOOT.O file.
If there is an existing boot.o file, you can delete or overwrite the file.
Move to the E1_SRV.000 directory or T1_SRV.000 directory.
Download the HWINIT.O, LOADER.O, and APPL.O files.
If there are existing files, you can delete or overwrite them.
Passport 8250 Command Line Interface Guide R2.2
Chapter 5 Flash file system 69
Advertisement
Table of Contents
