Air Shrouds; Installing The Standard Air Shrouds - Supermicro SuperServer SYS-111E-WR User Manual

4. Lift the fan housing up and out of the chassis.
5. Push the fan up from the bottom and out of the top of the housing.
6. Replace the failed fan with an identical fan, available from Supermicro. Push the new
fan into the housing, making sure the air flow direction is the same.
7. Put the fan housing back into the chassis and reconnect the fan power cables.
8. Power up the system and check that the fan is working properly and that the LED on the
control panel has turned off. Re-install the chassis cover.

Air Shrouds

Air shrouds concentrate airflow to maximize cooling efficiency.

Installing the Standard Air Shrouds

1. Remove power from the system.
2. Remove the chassis top cover,
3. Position the air shrouds into the system as shown below. To remove, simply lift the air
shroud out of the system.
Chapter 3: Maintenance and Component Installation
Figure 3-11. Installing the Air Shrouds
48