ABB CBXi Series User Manual page 45

Slide the other RMC connector into the Left-Hand T-slot of the remote FLX.
Insert the second interconnect
Note The termination block can only be used on the right-hand interlink connector of the last
FLX bus.
While it is possible, in a multi-tier system, to connect intermediate tiers from right to left to ease
installation, the final tier must be wired from left to right so that the
RHS connector of the last
©ABB 2022 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
FLX on the bus
CBXi IP Controller |
FLX
FLX bus can be terminated on the
Installation
unit on the
45