ABB CBXi Series User Manual page 35

Note: If the default IP address is used on a network, it can cause an
subnet mask is
10.0.0.0/8
It may be possible to reach the CBXi over the network but BACnet messaging may fail.
In this case you may need to use a directly-connected laptop, or a different network to configure
the CBXi. Alternatively you could change the CBXi's
serial number) to reduce the size of the
CBXi with serial number
Accessing the CBXi's Web UI
Point a web browser at the
Note: By default, all CBXi
username:
password:
It is recommended that you change these credentials by clicking on the User icon in the top-right of the
Web UI page and selecting
©ABB 2022 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
Subnetwork (Subnet)
(see
subnet
should have a subnet mask of
901001A
CBXi device's IP address, and log in to the Web UI.
devices leaving the factory are configured with the following login:
admin
cylonctl
Change Password
.
CBXi IP Controller |
IP Address conflict if the network's
on page 7).
subnet mask to
10.ss.ss.ss/24
that could give rise to conflicts. For example, a
10.90.10.01/24
Installation
, (where is the
ss
.
35