ABB CBXi Series User Manual page 39

Set the in the
Device ID
is the BACnet
Device ID
Note:
unique BACnet instance number to ensure proper communications. This
should be unique even across subnets. By default, it is set is set to the entire numeric portion of the
Controller's serial number.
If the CBXi device is to act as a
the relevant parameters on the
on page 16 for more detail)
©ABB 2022 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
> page, and optionally set a
BACnet Device
device instance number. Every
BBMD (allowing BACnet
BBMD/NAT page: (see
CBXi IP Controller |
:
Device Name
BACnet controller within the site must receive a
BACnet
communication between
BACnet IP Broadcast Management Device (BBMD)
Installation
instance number
Ethernet subnets), enter
39