ABB CBXi Series User Manual page 36

Configuring IP Ports and IP security
Specify the Ports for each protocol that the device will use, on the
Note: BACnet NAT is used for accessing the BACnet device from the Internet, for example in the case of
remote supervision. The Port Number set here should match the corresponding settings on the
> page.
BBMD/NAT
Warning: Cylon recommend that controllers should not be exposed on the Internet without a VPN. See
HT0038 Aspect CBXi System Network Security Best Practice
issues.
CBXi controllers are shipped with a self-signed certificate. If a new self-signed certificate is required,
then one can be created with the form on the
required, then a signing request can be generated on the
information entered on the
The >
IP Network Edit SSL Cert
applied to the current
rd
request for a 3 -party SSL Cert on the
©ABB 2022 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
IP Network
>
IP Network Edit SSL Cert
page allows you to enter the details for an SSL certificate, which can be
CBXi as a self-signed certificate, or else these details can be used to generate a
IP Network
CBXi IP Controller |
IP Network
for detailed discussion of security
> page. If a signed certificate is
Edit SSL Cert
>
IP Network Sign SSL Cert
page.
> page.
Sign SSL Cert
Installation
> page:
TCP/UDP Ports
BACnet
page, based on the
36