Table of Contents
Advertisement
Maintenance
The
and
Finish at
not available with maintenance
programmes.
Soak
You can use this maintenance
programme to soak stubborn soiling.
Take the accessories out of the oven
compartment.
Remove coarse soiling with a cloth.
Select
Further
|
.
Soak
Follow the instructions on the display.
Risk of injury caused by hot
steam.
At the end of the maintenance
programme, a lot of hot steam can
escape when the door is opened.
The steam can cause burns.
Step back and wait until the hot
steam has dissipated.
Once soaking is complete,
immediately remove the water and
condensate from the oven
compartment and drip channel using
a sponge or absorbent cloth.
Then dry the oven compartment and
the inside of the door with a cloth.
Tip: Once you have run the
Soak
maintenance programme, we
recommend that you run the
maintenance programme to also
Drying
remove moisture from inaccessible
areas of the oven compartment.
functions are
Start at
Maintenance
|
Cleaning and care
Drying
You can use this maintenance
programme to dry any residual moisture
in the oven compartment, including in
inaccessible areas, and protect the
oven against corrosion.
The
maintenance programme
Drying
comprises up to 3 phases: residual
water evaporation in the empty oven
compartment, drying by heating the
compartment and rapid cool-down with
the door slightly open.
Risk of infection due to
contaminated water in the water
container.
Germs can form in the water
container if you do not run the
maintenance programme. This
Drying
contaminated water could be
evaporated onto the food during the
next cooking process.
Run the
maintenance
Drying
programme to ensure that all residual
water fully evaporates.
Select
Further
|
Drying
.
Follow the instructions on the display.
Remove the water and condensate
from the oven compartment and drip
channel using a sponge or absorbent
cloth.
Switch the combination steam oven
off once the
Drying
programme has finished.
Maintenance
|
maintenance
91
Advertisement
Table of Contents
