Maintenance; Soak; Drying; Rinsing - Miele DGC7860 Operating And Installation Instructions

Cleaning and care

Maintenance

The and
Finish at
not available in maintenance
programmes.

Soak

Stubborn soiling can be soaked using
this maintenance programme.
 Let the oven cavity cool down.
 Take all accessories out of the oven
compartment.
 Remove coarse soiling with a cloth.
 Fill the water container.
 Select
Maintenance
The soaking process takes approx.
10 minutes.

Drying

This maintenance programme can be
used to dry any residual moisture in the
oven compartment, including in
inaccessible areas.
 Dry the oven compartment with a soft
cloth first.
 Select
Maintenance
The drying process takes approx.
20 minutes.

Rinsing

The water-carrying system is rinsed out
during this maintenance programme.
Any remaining food deposits are rinsed
away.
 Select
Maintenance
 Follow the instructions in the display.
The rinsing process takes approx. 10
minutes.
164
functions are
Start at
 | .
Soak
 | Drying .
 | Rinse .

Descaling the steam oven

We recommend using Miele descaling
tablets (see "Optional accessories") to
descale the appliance. These have
been specially developed for use with
Miele appliances to optimise the
descaling process. Other descaling
agents, which contain other acids
besides citric acid and/or other
undesirable substances, such as
chlorides, could cause damage to the
product. Moreover, the descaling
result required could not be
guaranteed if the descaling solution
was not of the appropriate
concentration.
Do not spill descaling agent onto
metal surfaces. This can cause
marks to appear.
However, should any descaling
agent get onto these surfaces, wipe
it away immediately.
The steam oven has to be descaled
after a certain number of operating
hours. When the time comes to descale
it, the number of uses remaining lights
up in the display. Only cooking
processes that use steam are counted.
The appliance will lock after the last
remaining cooking process.
We recommend that you descale the
appliance before it locks out.
During the descaling process, the water
container must be rinsed out and
refilled with fresh water. The
condensate container needs to be
emptied.