Miele DGC 735 Series Operating And Installation Instructions page 104

Problem solving guide
Problem
The FlexiClip runners do
not push in or pull out
smoothly.
The oven interior light-
ing switches off after a
short time.
The oven interior light-
ing is off or does not
switch on.
104
Cause and remedy
The bearings in the FlexiClip runners are not
sufficiently lubricated.
 Lubricate the bearings with the special Miele
lubricant.
Only the special Miele lubricant is designed for the
high temperatures in the oven compartment. Other
lubricants may resinify when heated and will gum
up the FlexiClip runners. You can obtain the
special Miele lubricant from your Miele dealer or
from the Miele Customer Service Department.
You have selected the
setting.
 If you want the oven interior lighting to be
switched on during the entire cooking programme,
select the Lighting
You have selected the
 Press the  sensor control to switch on the oven
interior lighting for 15 seconds.
 If required, select the
seconds setting.
The oven interior lighting is faulty.
 Call the Miele Customer Service Department.
|
Lighting "On" for 15 seconds
| On setting.
Lighting | Off setting.
| or
Lighting On "On" for 15