Servers - Nortel MAS User Manual

Procedure 63
Configuring the MAS platform on the n-way Meet Me servers
Step
This procedure assumes that the MAS is offline. If the MAS has not already been
deactivated, then deactivate it using
(page 82)
At the MAS console,
1
2
3
Parameter name
Content Store
Mirrored Peer Server
Content Store Servers Type = IP address
Copyright © 2007, Nortel Networks
.
Configure the MAS platform and the MAS Meet Me Conferencing service 133
Action
before continuing with this procedure.
From the console tree panel, select Services > System >
Configuration.
The Details panel displays all configuration data for the MAS
platform.
Double-click on a system configuration parameter to display the
properties window for the configuration parameter.
The MAS Console displays the entire list of system parameters. This
procedure only discusses the parameters associated with the Meet Me
Conferencing service.
Enter or modify the parameter value, using the following table.
Field information
Type = IP address
Default = blank
Default = Local IP address
Nortel Media Application Server
MAS Installation and Commissioning
NN42020-307 01.13 Standard
4.0 8 November 2007
ATTENTION
"Deactivate the Media Application Server"
ATTENTION
Description
This item contains the IP address of
the peer Content Store for mirrored
deployments.
For the third, fourth, or fifth nodes in an
multiserver deployment, it should be left
blank.
This item contains a semicolon delimited
list of Media Application Servers hosting
Content Stores. The Multimedia Controller
uses the Content Stores defined in this list.
For the third, fourth, or fifth nodes in an
multiserver deployment, it should contain
the IP addresses of the first two MAS
nodes (the two nodes with active content
storage components).