Nortel CallPilot Mini Quick Start Manual page 3

Installing the CallPilot Mini
Create an ACD Queue for CallPilot Mini
– Determine the CallPilot Mini TNs
– Create an ACD Queue
– Assign the CallPilot Mini TNs as agents on the ACD Queue
Start CallPilot Mini Administration programming.
Refer to the CallPilot Manager Set Up and Operation Guide.
Unpack CallPilot Mini
Mount the CallPilot Mini
on the wall
Connect the TCM and
power cables
Can you use the default
Yes
IP address
192.168.110.10
Change the IP address
serial or Ethernet cable
Change the IP address
using the serial port
Connect the CallPilot
Mini to the LAN
Run the
Quick Install Wizard
No
Ethernet
Serial
Installing the CallPilot Mini
Change the IP address
using an Ethernet
crossover cable
CallPilot Mini Quick Start Guide
3