Running A Technician Interface Telnet Session On A Predefined Slot; Figure 11. Enabling Billing Information Collection For Svcs On An Interface; Figure 12. Configuring A Dynamic Port Number - Bay Networks Baystream 7 Notice

BayStream 7.3 Documentation Change Notice
Figure 11. Enabling Billing Information Collection for SVCs on an Interface
TI set command
[4:1] $ set wfFrSwDlcmiEntry.wfFrSwDlcmiSvcBillingEnable.cct 1
Running a Technician Interface Telnet Session on a
Predefined Slot
You can Telnet a specific slot on a BayStream switch by specifying a local port
prefix as part of a dynamic port number as the optional argument to a remote
telnet command.
Figure 12.
[4:1] $ telnet 192.24.22.10 1101
You can configure a local port prefix using Site Manager or the Technician
Interface.
42
DLCMI MIB entry
Figure 12 shows the format for a dynamic port number.
Configuring a Dynamic Port Number
TI telnet command prefix number (11 through 166; 0=disable)
IP address of the
BayStream switch
BayStream Multiservice Software Version 7.3
attribute identifier
attribute value (1=enable; 2= disable)
slot number
BYS0097A
BYS0100A
115385-D Rev 01