Issue 1
Nautica Configuration Wizard Reference Guide
Common Errors
It is not possible to link a Nautica unit to an ISP if you have more
than one network adaptor on your PC. If you do have more than
one adaptor, the following error message will appear:
Figure 2-1.
If this message appears, refer to Chapter 5, "Troubleshooting".
You cannot continue with the single host addressing configuration
until this error is resolved.
Setup Procedures
With one network adaptor on your PC, selecting YES in
2-2
Figure 2-2.
Required Information
The Welcome screens list all the information you need before the
configuration can commence.
2-2
Multiple Network Interface Cards
launches one of the two Welcome screens.
ISP Connection
Figure
118814-A Rev. A