Figure 9. Displaying The Interfaces; Figure 10. Enabling Billing Information Collection For Pvcs On An Interface - Bay Networks Baystream 7 Notice

2.
Figure 9. Displaying the Interfaces
Figure 10. Enabling Billing Information Collection for PVCs on an Interface
TI set command
[4:1] $ set wfFrSwDlcmiEntry.wfFrSwDlcmiBillingEnable.cct 1
115385-D Rev 01
Use the Technician Interface set command to enable the collection of billing
information for one of the interfaces in Step 1.
a Technician Interface set command which enables billing information
collection for a PVC on the interface.
Technician Interface set command which enables billing information
collection for an SVC on the interface.
TI list command
[4:1] $ list -i wfFrSwDlcmiEntry
instances (show all instances of wfFrSwDlcmiEntry)
DLCMI MIB Entry
BayStream Multiservice Software Version 7.3
BayStream 7.3 Documentation Change Notice
Figure 10
Figure 11 shows an example of a
DLCMI MIB Entry
BYS0094A
attribute identifier
attribute value (1=enable; 2= disable)
shows an example of
BYS0096A
41