Table of Contents
Advertisement
6
Installation Options
Freestanding
Freestanding in an Alcove
Freestanding in a Mobile Home
Freestanding Hearth Stove
Heating Specifications
Approximate Maximum Heating Capacity (in square feet)*
EPA Tested Cord Wood BTUs per Hour**
Maximum Burn Time
Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside temperature. It is
*
also affected by the quality and moisture level of the fuel.
** Cord wood tests to determine BTU output are achieved with a single load of wood at each burn rate. At home, you are
likely to add more wood to your stove to maintain your desired comfort level. By the simple process of loading your
stove with additional wood, you could achieve up to a 20% higher heat output than established during EPA testing.
This model was tested for efficiency using method B415.1-10 and was determined to have a weighted average Higher
Heating Value (HHV) Overall Heating Efficiency (OHE) of 80%. The overall efficiency of the heater may be lower if the
heater is operated without a heat exchange blower or with the installed heat exchange blower turned off.
Dimensions
Emissions
This heater meets the 2020 U.S. EPA's emission limits for wood heaters. Tested to ASTM 2780-10, ASTM
2515-11, CSA B415.1-10 this heater has been shown to deliver heat at rates ranging from 10,252 to 31,922
BTU/hr. and an emission value of 1.2g/h. Report No. 0028WS131E
© Travis Industries
Features & Specifications
Features
1/12/2023 - 1574
Single Operating Control
Steel Plate Construction (5/16" & 3/16") (8mm & 10mm)
Heavy Duty Refractory Firebrick
Optional High-Tech Blower
1,200 to 2,000
9,285 to 62,007
Up to 10 Hours
Endeavor NexGen-Hybrid
Advertisement
Table of Contents
