6
Installation Options
Freestanding
Freestanding in an Alcove
Freestanding in a Mobile Home
Freestanding Hearth Stove
Heating Specifications
Approximate Maximum Heating Capacity (in square feet)*
Maximum BTUs per Hour (Cord Wood Calculation)
Maximum Burn Time
* Heating capacity will vary depending on the home's floor plan, degree of insulation, and the outside
temperature. It is also affected by the quality and moisture level of the fuel.
This model was tested for efficiency using method B415.1-10 and was determined to have a weighted average
Higher Heating Value (HHV) Overall Heating Efficiency (OHE) of 74.16%. Overall efficiency of the heater may be
lower if the heater is operated without a heat exchange blower or with the installed heat exchange blower turned
off.
Dimensions
23-1/2"
597mm
Weight: 448 Lbs.
Emissions
This heater meets the 2020 U.S. EPA's cord wood emission limits for wood heaters. Tested to EPA Alt-125,
ASTM E3053-17, ASTM 2515-11, CSA B415.1-10 this heater has been shown to deliver heat at rates
ranging from 15,435 to 67,090 BTU/hr and an emission value of 1.40g/h. Report No. 0028WS062E
© Travis Industries
Features & Specifications
24" 610mm
5-3/4" 146mm
1-3/4" 44mm
203 Kilos
2/25/2019 - 1507
Features
2.43 Cubic Foot Firebox Volume
Single Operating Control
Accepts Logs Up to 18" Long (457mm)
Steel Plate Construction (5/16" & 3/16") (8mm
& 10mm)
Heavy Duty Refractory Firebrick
Optional High-Tech Blower
1,200 to 2,000
67,090
Up to 10 Hours
6" 152mm ø
Note:
Measure side, corner, and back
clearances from the stove top.
Measure front clearances from
the stove face.
Height:
Sculptured or Cast Legs....30-5/8" 778mm
Height:
32"
813mm
Pedestal.............................34-5/8" 879mm
Figure 1
Endeavor II